Diagnostic group

Slicer calibration

Use calibration pages after mechanics, first layer, nozzle condition, and filament state are stable.

8 diagnostic pages First test Change one calibration value and save the result with material, nozzle, and printer context. Stop after one useful signal

Start here

Open the page that matches your evidence most closely.

Search all diagnostics

Slicer calibration Bed Mesh Calibration Run the five-patch first-layer test after washing the plate. Slicer calibration OrcaSlicer Flow Rate Calibration Extrude into free air, then print the single-wall flow box. Slicer calibration OrcaSlicer Pressure Advance Calibration Force seam to one corner and print the seam tower. Slicer calibration PETG Stringing In OrcaSlicer Print the two-tower test and lower temperature 5 C.

Klipper, probe, BLTouch, inductive probe, bed mesh

Bed Mesh Calibration

Bed Mesh Calibration: run a focused calibration test, record the result, and avoid mixing multiple slicer changes in one print.

Run the five-patch first-layer test after washing the plate. OrcaSlicer, PLA, PETG, calibration coupons

OrcaSlicer Flow Rate Calibration

OrcaSlicer Flow Rate Calibration: run a focused calibration test, record the result, and avoid mixing multiple slicer changes in one print.

Extrude into free air, then print the single-wall flow box. OrcaSlicer, Klipper, Marlin linear advance, Bambu-style flow dynamics

OrcaSlicer Pressure Advance Calibration

OrcaSlicer Pressure Advance Calibration: run a focused calibration test, record the result, and avoid mixing multiple slicer changes in one print.

Force seam to one corner and print the seam tower. PETG, OrcaSlicer, direct drive and Bowden printers

PETG Stringing In OrcaSlicer

Fix PETG stringing on direct-drive or OrcaSlicer profiles by separating temperature, wet spool, retraction, wipe, and pressure advance with one two-tower test.

Print the two-tower test and lower temperature 5 C. OrcaSlicer, PrusaSlicer, PLA, PETG, ASA

Temperature Tower Calibration

Temperature Tower Calibration: run a focused calibration test, record the result, and avoid mixing multiple slicer changes in one print.

Print the two-tower test and lower temperature 5 C. Bambu Studio, Bambu printers, AMS filament profiles

Bambu Studio Flow Dynamics Calibration

Bambu Studio Flow Dynamics Calibration: run a focused calibration test, record the result, and avoid mixing multiple slicer changes in one print.

Force seam to one corner and print the seam tower. Klipper, accelerometer, CoreXY, bedslinger printers

Input Shaping Calibration

Input Shaping Calibration: run a focused calibration test, record the result, and avoid mixing multiple slicer changes in one print.

Inspect collision marks and repeat a small motion cube. Direct drive, Bowden, PLA, PETG, TPU

Retraction Calibration

Retraction Calibration: run a focused calibration test, record the result, and avoid mixing multiple slicer changes in one print.

Print the two-tower test and lower temperature 5 C.